If fungoes are a ball tossed into the air by a batter and then struck as it comes down then a fungo bat is a baseball bat used for hitting fungoes. To go into more detail, a fungo bat is a long, lightweight baseball bat used by coaches (or parents) during pregame hitting or practice to help them hit grounders and pop flys with more consistency and less fatigue. To be one of the best in baseball, countless hours of practice are a must and fungo bats are intended for both infield and outfield practice. Plus, they help tremendously with control and accuracy so that coaches and parents can place a ball where they want when they want. 

There are many advantages to using a fungo bat. If you are a coach or a parent looking to improve your player's defensive skill set, you're going to want and need a fungo bat. A normal adult wooden baseball bat will weigh around 27-31 ounces, and after a couple of rounds of pop-flys, it is going to feel like you just went through a full-on workout. With the help of a fungo bat, you will be able to hit ground balls and pop flys all day without getting fatigued.  The barrel on a fungo bat will typically be 2 1/4 inches in diameter which greatly helps increase your control over the bat through the hitting zone. While the barrel has a much more thin diameter, it is also much longer in comparison to a normal wood baseball bat. This larger hitting surface and smaller barrel combine to give coaches and parents quick swing speeds with precise accuracy. 
A fungo bat is used by the coach to hit ground balls or fly balls to his team. All throughout high school and college many players use fungo bats to play fungo golf. This is when each person has a fungo bat and a baseball and they pick out targets around their field or complex and basically play it in the same manner as golf. Fungo bats should not be used to hit a pitched baseball because they are much weaker than normal bats and will break much much easier.
It is not clear why pregame infield fell out of favor in the majors. Today, coaches hit balls to infielders and outfielders during batting practice. Most players go at it leisurely, lobbing balls back in or across the diamond. That rankles old-school players like Jerry Kindall, a former major league infielder who coached Arizona to three N.C.A.A. titles before retiring in 1996.
Also called a baseball cup, box, athletic cup - made of hard impact-resistant plastic or light metal, often with flexible sides for comfort and protection, designed to protect the testicles and groin from impact of a baseball, baseball bat, cleats, or any other moving object. Absolutely required for catchers, pitchers, and often all infielders. Many leagues require all male players to wear jockstrap and cup for practices and games.
Shirt and pants worn by all players, coaches and managers. Each team generally has a unique pattern of colors and designs. Traditionally, the home team's uniform is predominantly white with the team's nickname, and the visiting team's is predominantly gray with (usually, but not always) the team's city. Teams often have white, gray and colored jerseys; colored jerseys can be worn at home or on the road, depending on the team's preference.

Prepping for baseball season requires not only discipline and hard work, but also the right gear. Because there are multiple parts to the game in fielding, pitching and batting, using the right equipment is vital to finding success within them all. In order to help you find success in every facet of the game, we select the best brands to carry including, but definitely not limited to Easton, Rawlings, Wilson, Louisville Slugger, and Mizuno. Every player has his own preferences when it comes to a glove, bat, and cleats and that's why it's so important to have not only a vast array of brands and styles within each piece of equipment, but also a Guide on How to Shop for Baseball that helps players or parents discover which glove, bat, and other equipment is the right choice.
The bat's form has become more refined over time. In the mid-19th century, baseball batters were known to shape or whittle their own bats by hand. This allowed there to be a wide variety in shape, size, and weight. For example, there were flat bats, round bats, short bats, and fat bats. Earlier bats were known to be much heavier and larger than today's regulated ones. During the 19th century, many shapes were experimented with, as well as handle designs. Today, bats are much more uniform in design.
Manufacturers position each bat's label over the mechanically weaker side of the wood.[9] To reduce chance of fracture,[9] and maybe deliver more energy to the ball,[10] a bat is intended to be held so the label faces sky or ground when it strikes the ball during a horizontal swing.[9] In this orientation, the bat is considered stiffer and less likely to break.[11]
Once the basic bat has been turned, it has the manufacturer's name, the serial number, and often the signature of the player endorsing it branded into it opposite the wood's best side. Honus Wagner was the first player to endorse and sign a bat. Next, most bats are given a rounded head, but some 30%[citation needed] of players prefer a "cup-balanced" head, in which a cup-shaped recess is made in the head; this lightens the bat and moves its center of gravity toward the handle. Finally, the bat is stained in one of several standard colors, including natural, red, black, and two-tone blue and white.

A baseball bat is divided into several regions. The "barrel" is the thick part of the bat, where it is meant to hit the ball. The part of the barrel best for hitting the ball, according to construction and swinging style, is often called the "sweet spot". The end of the barrel is called the "top", "end" or "cap" of the bat. Opposite the cap, the barrel narrows until it meets the "handle". The handle is comparatively thin, so that batters can comfortably grip the bat in their hands. Sometimes, especially on metal bats, the handle is wrapped with a rubber or tape "grip". Finally, below the handle is the "knob" of the bat, a wider piece that keeps the bat from slipping from a batter's hands.

If you have attended a Major League Baseball game in the last 15 years, pregame infield practice, known simply as infield, may be unfamiliar. All but abandoned by the early 2000s, the ritual lives on at the C.W.S. and at college stadiums all over the country. On Monday night, the routine will be repeated before Virginia takes on Vanderbilt in the first game of the finals.


Play It Again Sports® is a registered trademark of Winmark Corporation based in Minneapolis, MN. The Play It Again Sports®, Plato's Closet®, Once Upon A Child®, Music Go Round®, and Style Encore® trademarks and logos utilized in this website are owned by Winmark Corporation and any unauthorized use of these trademarks by others is subject to action under federal and state trademark laws. Other brand names are trademarked or registered by their respective companies.
Also called a baseball cup, box, athletic cup - made of hard impact-resistant plastic or light metal, often with flexible sides for comfort and protection, designed to protect the testicles and groin from impact of a baseball, baseball bat, cleats, or any other moving object. Absolutely required for catchers, pitchers, and often all infielders. Many leagues require all male players to wear jockstrap and cup for practices and games.
Many players "bone" their bats, meaning that before games, they rub their bats repeatedly with a hard object, believing this closes the pores on the wood and hardens the bat. Animal bones are a popular boning material, but rolling pins, soda bottles and the edge of a porcelain sink have also been used. Pete Rose had his own way of hardening his bats: he soaked them in a tub of motor oil in his basement then hung them up to dry.[25]
Do this for about three minutes, then collect the balls and work on 5-3, 6-4, and 4-6 plays for another three minutes. This is followed by hitting balls to the 5-6 hole. If the third baseman doesn’t get it, he retreats back to third, and the shortstop flips to third for a force-out, rather than throwing across or turn a long double play. The other fungo batter hits balls to the second baseman, who works on throwing to first.
It is not clear why pregame infield fell out of favor in the majors. Today, coaches hit balls to infielders and outfielders during batting practice. Most players go at it leisurely, lobbing balls back in or across the diamond. That rankles old-school players like Jerry Kindall, a former major league infielder who coached Arizona to three N.C.A.A. titles before retiring in 1996.
This is the drill we ran all through high school. It is the most time effective and skill intensive way to warm up a team, but your boys must be able to play catch! Fungo-ers stand in the "fungoe circles" that any good field has (and if it doesn't, you know where they're supposed to be - just outside of the home-plate dirt circle, towards the dugouts). The catch to this method is this - you have two first basemen, allowing both sides of the infield to throw across. Herein lies the only danger - one of the firstbasemen has a lengthy throw back to a shagger, so caution must be excersized (a catcher with a good head on his shoulders really helps).

Even in those formative years, authorities on the game warned the practice of hitting fungoes should be limited to coaches. Henry Chadwick, one of baseball’s earliest proponents, claimed “The weakest batting is shown when the batsmen indulges in fungo hitting,” according to the Art of Batting. Others agreed that the practice was bad for training a batter’s reflexes: “While watching some of our freshmen practicing ‘fungo’ batting the other afternoon it occurred to me that it was about the worst kind of practice a batsman could imagine in training his eye in batting,” a writer claimed in the March 3, 1886 edition of The Sporting Life. “It trains the eye to meet the ball in batting it in a manner which never occurs in actual play. It ought to be prohibited on every well regulated ball field.”
×