Players can be very particular about their bats. Ted Williams cleaned his bats with alcohol every night and periodically took them to the post office to weigh them. "Bats pick up condensation and dirt lying around on the ground," he wrote, "They can gain an ounce or more in a surprisingly short time." Ichiro Suzuki also takes great care that his bats do not accumulate moisture and thus gain weight: he stores his bats in humidors, one in the club house and another, a portable one, for the road. Rod Carew fought moisture by storing his bats in a box full of sawdust in the warmest part of his house. "The sawdust acts as a buffer between the bats and the environment," he explained, "absorbing any moisture before it can seep into the wood."[25]
Both wooden and metal alloy (generally aluminum) bats are generally permitted in amateur baseball. Metal alloy bats are generally regarded as being capable of hitting a ball faster and farther with the same power. However, increasing numbers of "wooden bat leagues" have emerged in recent years, reflecting a trend back to wood over safety concerns and, in the case of collegiate summer baseball wood-bat leagues, to better prepare players for the professional leagues that require wood bats. Metal alloy bats can send a ball towards an unprotected pitcher's head up to 60 ft 6 in (18.44 m) away at a velocity far too high for the pitcher to get out of the way in time. Some amateur baseball organizations enforce bat manufacturing and testing standards which attempt to limit maximum ball speed for wood and non-wood bats.[17][18][19]

This sounds like a lot of information, but with a little practise on the coaches part, it runs quite smoothly. Two to three reps per player in the field per section is quite adequate, and with 14 men on the field, this whole routine should take about 7 minutes. It's quite snappy, and quite impressive. I had many a parent marvel to me after witnessing it - "you look like a professional team!" I wouldn't try the routine with anything less than a 14 yr old select team, but with the talent to do it right, it's fantastic.

The origin of the word "fungo" is unknown and argued upon as there are many possible options as to the origins of this unique word. It is assumed by many to be derived from the Scottish word fung meaning to pitch, toss, or fling. This would make sense, as fungo bats are designed to do just that. Or, the alternative to this origin is that fungo comes from 1937 where David Shulman, writer for the American Speech, said, "My guess is that the word, which is baseball slang, may be explained through the elements of a compound word, fun and go." Lastly, a third belief is that the word fungo comes from an old game, similar to that of baseball, where the players used to chant, "One go, two goes, fun goes." 


When it comes to baseball gloves, it's not uncommon for players to develop a deep attachment to their glove. It's the same glove they trot out onto the field with every inning and many players, once they are into the 'adult' sizes, use the same glove for their entire life! It might seem crazy to outsiders, but there's just something about a high quality, leather baseball glove that becomes part of a player to the point that it feels wrong to wear a different glove. That is why it is so important to find the right glove, the right pocket, the right size, the right leather, and the right color. Gloves aren't just gloves, they are part of who you become as a player. Check out our selection of gloves by position, size, and brand or explore the buying guide specifically made to help you decide which baseball glove to buy if you need some guidance!
Chris Coste, a former catcher for the Philadelphia Phillies who coaches at Division III Concordia, in Moorhead, Minn., agreed. “When baseball is every single day, you’ve got to do things differently,” he said. “In the big leagues, they get so many ground balls during batting practice that infield is more for the fans and more for the scouts and things like that. At this level, we need it, and we love doing it.”
“They’re not moving, their feet are apart, their gloves are on the ground, backs are flat, and they’re working down to up, out to in, basically a steady roll back and forth probably 15 to 20 each,” Bates said. “Then they’ll turn their body, work glove side for another 15 to 20, and backhand 15 to 20. No movement, really, just making sure we’re watching the ball roll into our glove, fielding it, and doing all the things fundamentally correct.”
Manufacturers position each bat's label over the mechanically weaker side of the wood.[9] To reduce chance of fracture,[9] and maybe deliver more energy to the ball,[10] a bat is intended to be held so the label faces sky or ground when it strikes the ball during a horizontal swing.[9] In this orientation, the bat is considered stiffer and less likely to break.[11]
Many players "bone" their bats, meaning that before games, they rub their bats repeatedly with a hard object, believing this closes the pores on the wood and hardens the bat. Animal bones are a popular boning material, but rolling pins, soda bottles and the edge of a porcelain sink have also been used. Pete Rose had his own way of hardening his bats: he soaked them in a tub of motor oil in his basement then hung them up to dry.[25]
Manufacturers position each bat's label over the mechanically weaker side of the wood.[9] To reduce chance of fracture,[9] and maybe deliver more energy to the ball,[10] a bat is intended to be held so the label faces sky or ground when it strikes the ball during a horizontal swing.[9] In this orientation, the bat is considered stiffer and less likely to break.[11]
This sounds like a lot of information, but with a little practise on the coaches part, it runs quite smoothly. Two to three reps per player in the field per section is quite adequate, and with 14 men on the field, this whole routine should take about 7 minutes. It's quite snappy, and quite impressive. I had many a parent marvel to me after witnessing it - "you look like a professional team!" I wouldn't try the routine with anything less than a 14 yr old select team, but with the talent to do it right, it's fantastic.
How the bat is made is what differentiates it from the typical regulation bat used by major league players. In addition to being lighter and thinner, the bat is also much longer compared to the normal bat. It ranges between 35 – 37 inches in terms of length. In terms of weight, the bat weighs between 17 – 22 ounces. Of great importance to note is the fact that the bat features a bigger barrel than the normal ones. Since it’s flatter and features a small diameter, it’s ideal when it comes to hitting ground balls as well as pop flies. This would be necessary during the fielding practice of any team regardless of the level.
Both wooden and metal alloy (generally aluminum) bats are generally permitted in amateur baseball. Metal alloy bats are generally regarded as being capable of hitting a ball faster and farther with the same power. However, increasing numbers of "wooden bat leagues" have emerged in recent years, reflecting a trend back to wood over safety concerns and, in the case of collegiate summer baseball wood-bat leagues, to better prepare players for the professional leagues that require wood bats. Metal alloy bats can send a ball towards an unprotected pitcher's head up to 60 ft 6 in (18.44 m) away at a velocity far too high for the pitcher to get out of the way in time. Some amateur baseball organizations enforce bat manufacturing and testing standards which attempt to limit maximum ball speed for wood and non-wood bats.[17][18][19]
Secondly, the first base fungo hits balls to the third baseman, who turns a double play with the second baseman to the normal first baseman, while the third base fungo hits balls to the shortstop, who throws to a shortened deep firstbaseman (this means that the deep firstbaseman stands closer to the shortstop than normal, so that the throw across this infield is the correct distance - this does NOT mean that the deep man stands any closer to the normal first base position - this length should always be sufficient)
Next, the third base fungo hits to left, who come home, third baseman cuts (again, 60' from home, about the pitchers mound). First base fungo hits to right, who throw again to second (this is where we practised cutting off doubles on balls hit into the right field corner - it's really practiseing hitting your cutoff man quickly than anything else - also the reason it's safe to do while left field goes home).
Fungo bats have been around since the beginning of baseball and as most of us may know, baseball was said to be invented by Abner Doubleday in Cooperstown, New York during the summer of 1839. Since fungo bats were much easier to swing and gave off a ton of pop, they were almost seen as cheating back in the day. In a book from 1897 named "The Technical Terms of Baseball," the sportswriter Henry Chadwick stated,"The weakest batting is shown when the batsman indulges in fungo hitting." It wasn't until baseball bat regulations came around that fungo bats were only used by coaches and parents. 
×