Baseball bats are made of either wood, or a metal alloy (typically aluminum). Most wooden bats are made from ash. Other woods include maple, hickory, and bamboo. Hickory has fallen into disfavor over its greater weight, which slows down bat speed, while maple bats gained popularity[5] following the introduction of the first major league sanctioned model in 1997. The first player to use one was Joe Carter of the Toronto Blue Jays.[6] Barry Bonds used maple bats the seasons he broke baseball's single-season home run record in 2001, and the career home run record in 2007.[6] In 2010, the increased tendency of maple bats to shatter has caused Major League Baseball to examine their use, banning some models in minor league play.[7][8]
If you care about getting the best baseball gear at the best price then you have come to the right place. Better Baseball stocks the full line of baseball bats, baseball gloves, batting gloves, baseball helmets, baseballs, field equipment, batting cages, protective screens, catcher's gear and more, at great prices, and we ship them directly to you faster than anyone else.
Fungo bats typically weigh between 17 to 22 ounces and may be as long as 37 inches, making them longer than most bats used for hitting. According to Pro Bats, a typical professional baseball player uses a bat that is about 34 inches long and weighs about 32 ounces, although there is considerable variation. Fungo bats not only are longer than regular bats, they also are skinnier. Like regular bats, fungo bats can be made of metal or wood.
Also called a baseball cup, box, athletic cup - made of hard impact-resistant plastic or light metal, often with flexible sides for comfort and protection, designed to protect the testicles and groin from impact of a baseball, baseball bat, cleats, or any other moving object. Absolutely required for catchers, pitchers, and often all infielders. Many leagues require all male players to wear jockstrap and cup for practices and games.
Four historically significant baseball bats showcased in the National Baseball Hall of Fame's traveling exhibit "Baseball As America". From left to right: bat used by Babe Ruth to hit his 60th home run during the 1927 season, bat used by Roger Maris to hit his 61st home run during the 1961 season, bat used by Mark McGwire to hit his 70th home run during the 1998 season, and the bat used by Sammy Sosa for his 66th home run during the same season.
“They’re not moving, their feet are apart, their gloves are on the ground, backs are flat, and they’re working down to up, out to in, basically a steady roll back and forth probably 15 to 20 each,” Bates said. “Then they’ll turn their body, work glove side for another 15 to 20, and backhand 15 to 20. No movement, really, just making sure we’re watching the ball roll into our glove, fielding it, and doing all the things fundamentally correct.”

If your high school or travel team has at least two coaches, you can use what Bates calls a two-fungo drill. One coach can hit to third and second, while the other hits to short and first. If catchers are finished working with the pitchers, they can feed balls to the fungo hitters. The idea is for the third baseman to practice turning a 5-4-3, with the first baseman moving up toward second base about 60 feet instead of 90, with a net behind him to catch overthrows. The shortstop works on throwing across on 6-3s.
Once in a while, veteran managers revive it. The Giants took infield occasionally in 2008 and 2013 under Bruce Bochy, and Jim Leyland instituted infield drills before batting practice late in his tenure in Detroit. Molitor, for one, misses it. He took infield even as a designated hitter late in his career because he hated sitting around for almost two hours waiting to play.
One of the major advantages of wood fungo has to do with the feel of your hands. While the metal ones feature a conventional metal bat knob, their wood counterparts usually come in 2 knob designs. The conventional metal-bat style knob is excellent for folks whose hands are sweaty. The flared knob is amazing for those that do not want the knob beating their hand’s bottom which is uncomfortable during practice.
The most obvious reasons to utilize a fungo bat is the fact that it’s lightweight. It’s handy to coaches when conducting fielding practice since he or she has to hit plenty of balls to warm up his or her players. What is for sure is that hitting countless balls during practice can be tiring. Consequently, having a bat that’s lighter weight is magical at preventing the coach and/or players from getting tired.
Fungo bats are usually 36 or 37 inches long.  Due their thinner, lighter design, they are a very versatile tool for any coach. It is so much easier to hit hundreds of grounders and fly balls with a fungo than with a regular bat.  As well, with the prices of today’s top end bats, a $35 fungo makes more sense. Don’t dent the $350 war clubs in your bat bag.

A baseball bat is a smooth wooden or metal club used in the sport of baseball to hit the ball after it is thrown by the pitcher. By regulation it may be no more than 2.75 inches (70 mm) in diameter at the thickest part and no more than 42 inches (1,100 mm) long. Although historically bats approaching 3 pounds (1.4 kg) were swung,[1] today bats of 33 ounces (0.94 kg) are common, topping out at 34 ounces (0.96 kg) to 36 ounces (1.0 kg).[1]
Fungo bats aren’t typical bats like the ones Mike Trout takes with him to a game situation. Rather, they’re more of practice bats. The bats are specially made for coaches to utilize when testing the fielding of their players. For example, a coach would break out his or her fungo bat when he or she is looking to hit his or her shortstop a couple of ground balls or when he/she hits pop flies to the centerfielder.
Once in a while, veteran managers revive it. The Giants took infield occasionally in 2008 and 2013 under Bruce Bochy, and Jim Leyland instituted infield drills before batting practice late in his tenure in Detroit. Molitor, for one, misses it. He took infield even as a designated hitter late in his career because he hated sitting around for almost two hours waiting to play.
Once the basic bat has been turned, it has the manufacturer's name, the serial number, and often the signature of the player endorsing it branded into it opposite the wood's best side. Honus Wagner was the first player to endorse and sign a bat. Next, most bats are given a rounded head, but some 30%[citation needed] of players prefer a "cup-balanced" head, in which a cup-shaped recess is made in the head; this lightens the bat and moves its center of gravity toward the handle. Finally, the bat is stained in one of several standard colors, including natural, red, black, and two-tone blue and white.
Do this for about three minutes, then collect the balls and work on 5-3, 6-4, and 4-6 plays for another three minutes. This is followed by hitting balls to the 5-6 hole. If the third baseman doesn’t get it, he retreats back to third, and the shortstop flips to third for a force-out, rather than throwing across or turn a long double play. The other fungo batter hits balls to the second baseman, who works on throwing to first.
A baseball bat is divided into several regions. The "barrel" is the thick part of the bat, where it is meant to hit the ball. The part of the barrel best for hitting the ball, according to construction and swinging style, is often called the "sweet spot". The end of the barrel is called the "top", "end" or "cap" of the bat. Opposite the cap, the barrel narrows until it meets the "handle". The handle is comparatively thin, so that batters can comfortably grip the bat in their hands. Sometimes, especially on metal bats, the handle is wrapped with a rubber or tape "grip". Finally, below the handle is the "knob" of the bat, a wider piece that keeps the bat from slipping from a batter's hands.
A fungo bat is a specially designed bat used by baseball and softball coaches for practice. The etymology of the word fungo ( /ˈfʌŋɡoʊ/) is uncertain, but the Oxford English Dictionary suggests it is derived from the Scots fung: to pitch, toss, or fling.[26] A fungo is longer and lighter than a regulation bat, with a smaller diameter. The bat is designed to hit balls tossed up in the air by the batter, not pitched balls.[27] Typical fungo bats are 35 to 37 inches (89 to 94 cm) long and weigh 17 to 22 ounces (480 to 620 g). Coaches hit many balls during fielding practice, and the weight and length allow the coach to hit balls repeatedly with high accuracy. The small diameter also allows coaches to easily hit pop-ups to catchers and infielders along with ground balls due to better control of the barrel of the bat.
Fungo bats aren’t typical bats like the ones Mike Trout takes with him to a game situation. Rather, they’re more of practice bats. The bats are specially made for coaches to utilize when testing the fielding of their players. For example, a coach would break out his or her fungo bat when he or she is looking to hit his or her shortstop a couple of ground balls or when he/she hits pop flies to the centerfielder.
This is the drill we ran all through high school. It is the most time effective and skill intensive way to warm up a team, but your boys must be able to play catch! Fungo-ers stand in the "fungoe circles" that any good field has (and if it doesn't, you know where they're supposed to be - just outside of the home-plate dirt circle, towards the dugouts). The catch to this method is this - you have two first basemen, allowing both sides of the infield to throw across. Herein lies the only danger - one of the firstbasemen has a lengthy throw back to a shagger, so caution must be excersized (a catcher with a good head on his shoulders really helps).
For starters, we should clarify just what we’re talking about when we say fungo bat. Longer, lighter and thinner than a regulation bat (but a larger barrel), a fungo bat is typically 35 to 37 inches long, and weighs between 17 and 22 ounces. As David Allison wrote in the June 1978 edition of Country Journal, “A fungo bat looks to be a cross between a baseball bat and a broomstick.”
×