A baseball bat is a smooth wooden or metal club used in the sport of baseball to hit the ball after it is thrown by the pitcher. By regulation it may be no more than 2.75 inches (70 mm) in diameter at the thickest part and no more than 42 inches (1,100 mm) long. Although historically bats approaching 3 pounds (1.4 kg) were swung,[1] today bats of 33 ounces (0.94 kg) are common, topping out at 34 ounces (0.96 kg) to 36 ounces (1.0 kg).[1]
Helmet worn by batter to protect the head and the ear facing the pitcher from the ball. Professional models have only one ear protector (left ear for right-handed batters, right ear for lefties), amateur and junior helmets usually have ear protectors on both sides, for better protection from loose balls, and to reduce costs to teams (all players can use the same style of helmet).

Fungo bats aren’t typical bats like the ones Mike Trout takes with him to a game situation. Rather, they’re more of practice bats. The bats are specially made for coaches to utilize when testing the fielding of their players. For example, a coach would break out his or her fungo bat when he or she is looking to hit his or her shortstop a couple of ground balls or when he/she hits pop flies to the centerfielder.

If fungoes are a ball tossed into the air by a batter and then struck as it comes down then a fungo bat is a baseball bat used for hitting fungoes. To go into more detail, a fungo bat is a long, lightweight baseball bat used by coaches (or parents) during pregame hitting or practice to help them hit grounders and pop flys with more consistency and less fatigue. To be one of the best in baseball, countless hours of practice are a must and fungo bats are intended for both infield and outfield practice. Plus, they help tremendously with control and accuracy so that coaches and parents can place a ball where they want when they want. 


Baseball bats are made of either wood, or a metal alloy (typically aluminum). Most wooden bats are made from ash. Other woods include maple, hickory, and bamboo. Hickory has fallen into disfavor over its greater weight, which slows down bat speed, while maple bats gained popularity[5] following the introduction of the first major league sanctioned model in 1997. The first player to use one was Joe Carter of the Toronto Blue Jays.[6] Barry Bonds used maple bats the seasons he broke baseball's single-season home run record in 2001, and the career home run record in 2007.[6] In 2010, the increased tendency of maple bats to shatter has caused Major League Baseball to examine their use, banning some models in minor league play.[7][8]

Even without a 100-mile per hour fastball barreling toward you, safety is paramount. Our helmet selection offers a wide variety of sizes, shapes, and colors to choose from. We also offer catcher’s gear, knee pads for home plate umpires, and other products to alleviate fatigue or the risk of injury. Our baseball equipment selection includes excellent training aids, such as batting tees, batting cages, pop-up hitting systems, professional pitching rubbers, mounds, contact training balls, pocket radars, and more.
Once in a while, veteran managers revive it. The Giants took infield occasionally in 2008 and 2013 under Bruce Bochy, and Jim Leyland instituted infield drills before batting practice late in his tenure in Detroit. Molitor, for one, misses it. He took infield even as a designated hitter late in his career because he hated sitting around for almost two hours waiting to play.
This is the drill we ran all through high school. It is the most time effective and skill intensive way to warm up a team, but your boys must be able to play catch! Fungo-ers stand in the "fungoe circles" that any good field has (and if it doesn't, you know where they're supposed to be - just outside of the home-plate dirt circle, towards the dugouts). The catch to this method is this - you have two first basemen, allowing both sides of the infield to throw across. Herein lies the only danger - one of the firstbasemen has a lengthy throw back to a shagger, so caution must be excersized (a catcher with a good head on his shoulders really helps).
Within league standards there is ample latitude for individual variation, many batters settling on their own bat profile, or one used by a successful batter. Formerly, bats were hand-turned from a template with precise calibration points; today they are machine-turned to a fixed metal template. Historically significant templates may be kept in a bat manufacturers' vault; for example, Babe Ruth's template, which became popular among major-league players, is R43 in the Louisville Slugger archives.[citation needed]
“They’re not moving, their feet are apart, their gloves are on the ground, backs are flat, and they’re working down to up, out to in, basically a steady roll back and forth probably 15 to 20 each,” Bates said. “Then they’ll turn their body, work glove side for another 15 to 20, and backhand 15 to 20. No movement, really, just making sure we’re watching the ball roll into our glove, fielding it, and doing all the things fundamentally correct.”
Fungo bats are usually 36 or 37 inches long.  Due their thinner, lighter design, they are a very versatile tool for any coach. It is so much easier to hit hundreds of grounders and fly balls with a fungo than with a regular bat.  As well, with the prices of today’s top end bats, a $35 fungo makes more sense. Don’t dent the $350 war clubs in your bat bag.

Once the basic bat has been turned, it has the manufacturer's name, the serial number, and often the signature of the player endorsing it branded into it opposite the wood's best side. Honus Wagner was the first player to endorse and sign a bat. Next, most bats are given a rounded head, but some 30%[citation needed] of players prefer a "cup-balanced" head, in which a cup-shaped recess is made in the head; this lightens the bat and moves its center of gravity toward the handle. Finally, the bat is stained in one of several standard colors, including natural, red, black, and two-tone blue and white.
Helmet worn by batter to protect the head and the ear facing the pitcher from the ball. Professional models have only one ear protector (left ear for right-handed batters, right ear for lefties), amateur and junior helmets usually have ear protectors on both sides, for better protection from loose balls, and to reduce costs to teams (all players can use the same style of helmet).
A baseball bat is divided into several regions. The "barrel" is the thick part of the bat, where it is meant to hit the ball. The part of the barrel best for hitting the ball, according to construction and swinging style, is often called the "sweet spot". The end of the barrel is called the "top", "end" or "cap" of the bat. Opposite the cap, the barrel narrows until it meets the "handle". The handle is comparatively thin, so that batters can comfortably grip the bat in their hands. Sometimes, especially on metal bats, the handle is wrapped with a rubber or tape "grip". Finally, below the handle is the "knob" of the bat, a wider piece that keeps the bat from slipping from a batter's hands.
The bat's form has become more refined over time. In the mid-19th century, baseball batters were known to shape or whittle their own bats by hand. This allowed there to be a wide variety in shape, size, and weight. For example, there were flat bats, round bats, short bats, and fat bats. Earlier bats were known to be much heavier and larger than today's regulated ones. During the 19th century, many shapes were experimented with, as well as handle designs. Today, bats are much more uniform in design.
Do this for about three minutes, then collect the balls and work on 5-3, 6-4, and 4-6 plays for another three minutes. This is followed by hitting balls to the 5-6 hole. If the third baseman doesn’t get it, he retreats back to third, and the shortstop flips to third for a force-out, rather than throwing across or turn a long double play. The other fungo batter hits balls to the second baseman, who works on throwing to first.
One of the major advantages of wood fungo has to do with the feel of your hands. While the metal ones feature a conventional metal bat knob, their wood counterparts usually come in 2 knob designs. The conventional metal-bat style knob is excellent for folks whose hands are sweaty. The flared knob is amazing for those that do not want the knob beating their hand’s bottom which is uncomfortable during practice.
Play It Again Sports® is a registered trademark of Winmark Corporation based in Minneapolis, MN. The Play It Again Sports®, Plato's Closet®, Once Upon A Child®, Music Go Round®, and Style Encore® trademarks and logos utilized in this website are owned by Winmark Corporation and any unauthorized use of these trademarks by others is subject to action under federal and state trademark laws. Other brand names are trademarked or registered by their respective companies.
We’re in the business of helping you build champions. You can shop with confidence knowing that you can return any new, unused item for a refund without any restocking fees within 30 days of delivery. Exclusions may apply to special or custom orders. Shopping for a team or a league? Contact our team sales department for the best pricing on all your baseball supplies. If you have any questions, an experienced member of our team is standing by to help. Enjoy a shopping experience unlike any other by choosing Anthem Sports for all your athletic needs.
On June 17, 1890, Emile Kinst patented the ball-bat, or banana bat. The bat is shaped with a curve, hence the name banana bat. The creator of the bat, Kinst wrote: "The object of my invention is to provide a ball-bat which shall produce a rotary or spinning motion of the ball in its flight to a higher degree than is possible with any present known form of ball-bat, and thus to make it more difficult to catch the ball, or if caught, to hold it, and thus further to modify the conditions of the game".
The Wright & Ditsons Lajoie baseball bat. This bat had a normal size barrel but had two knobs on the handle. The lowest knob was at the bottom of the handle and the other knob was roughly two inches above the lowest knob. This was designed to have better spacing between the hands due to the knob being in the middle of the grip. This also gave batters an advantage when they choked up on the bat, because the second knob provided a better grip.

The most obvious reasons to utilize a fungo bat is the fact that it’s lightweight. It’s handy to coaches when conducting fielding practice since he or she has to hit plenty of balls to warm up his or her players. What is for sure is that hitting countless balls during practice can be tiring. Consequently, having a bat that’s lighter weight is magical at preventing the coach and/or players from getting tired.
To figure out who shoots first, players usually throw or roll a baseball to a certain object (usually at close range) and whoever is closest shoots first. The first person then gets to choose the first hole and tees off. To tee off (and for most shots) players hit the ball like they were playing baseball, but depending on the distance from the hole the player may choose to ‘putt’ the ball instead of hitting it. To putt the ball, the player places the ball on the cup (the end of the fungo bat), and can toss the ball from the cup in hopes of getting a more accurate shot.[1] In shooting or putting, the player must have one foot where the ball landed during the entire duration of their swing or putt, failure to keep the foot planted results in a loss of a stroke. Scorekeeping is identical to traditional golf; the player with the fewest strokes essentially wins the hole.[2] Players traditionally play nine or eighteen holes of fungo golf, and at the end the person with the fewest strokes in the set number of holes wins the game.[3]
×