Maple bats in particular were once known (circa 2008) to potentially shatter in a way that resulted in many sharp edges, sometimes creating more dangerous projectiles when a bat broke.[9][13] Maple bat manufacture evolved significantly, in cooperation with Major League Baseball,[11] paying special attention to grain slope, and including an ink spot test to confirm safest wood grain orientation.[11]
Players can be very particular about their bats. Ted Williams cleaned his bats with alcohol every night and periodically took them to the post office to weigh them. "Bats pick up condensation and dirt lying around on the ground," he wrote, "They can gain an ounce or more in a surprisingly short time." Ichiro Suzuki also takes great care that his bats do not accumulate moisture and thus gain weight: he stores his bats in humidors, one in the club house and another, a portable one, for the road. Rod Carew fought moisture by storing his bats in a box full of sawdust in the warmest part of his house. "The sawdust acts as a buffer between the bats and the environment," he explained, "absorbing any moisture before it can seep into the wood."[25]
Do this for about three minutes, then collect the balls and work on 5-3, 6-4, and 4-6 plays for another three minutes. This is followed by hitting balls to the 5-6 hole. If the third baseman doesn’t get it, he retreats back to third, and the shortstop flips to third for a force-out, rather than throwing across or turn a long double play. The other fungo batter hits balls to the second baseman, who works on throwing to first.
First base fungo hits fly balls to center field (helps here if both fungo hitters move up and apart, hitting from about the front of the mound extended towards the bases). Center throws to second, second baseman is cutoff (for us it was, anyways - change to suit your style). Third base fungo hits balls to left field, who throw to third, with a second shortstop as cutoff (but you really don't need one, if you're shorthanded).

Fungo bats are typically only used by coaches, to consistently place grounders and pop flies to their fielders for practice purposes. And with a fungo bat in their hands, some coaches can pull off wicked accuracy – as one story goes, the late California Angels player and coach Jimmie Reese once shot an 82 on an 18-hole golf course using nothing but a putter and a fungo bat.


Play It Again Sports® is a registered trademark of Winmark Corporation based in Minneapolis, MN. Any unauthorized use of this trademark by others is subject to action under federal and state trademark laws. Other brand names are trademarked or registered by their respective companies. Each Play It Again Sports store is independently owned and operated.
Play It Again Sports® is a registered trademark of Winmark Corporation based in Minneapolis, MN. Any unauthorized use of this trademark by others is subject to action under federal and state trademark laws. Other brand names are trademarked or registered by their respective companies. Each Play It Again Sports store is independently owned and operated.
This is the drill we ran all through high school. It is the most time effective and skill intensive way to warm up a team, but your boys must be able to play catch! Fungo-ers stand in the "fungoe circles" that any good field has (and if it doesn't, you know where they're supposed to be - just outside of the home-plate dirt circle, towards the dugouts). The catch to this method is this - you have two first basemen, allowing both sides of the infield to throw across. Herein lies the only danger - one of the firstbasemen has a lengthy throw back to a shagger, so caution must be excersized (a catcher with a good head on his shoulders really helps).
Once the basic bat has been turned, it has the manufacturer's name, the serial number, and often the signature of the player endorsing it branded into it opposite the wood's best side. Honus Wagner was the first player to endorse and sign a bat. Next, most bats are given a rounded head, but some 30%[citation needed] of players prefer a "cup-balanced" head, in which a cup-shaped recess is made in the head; this lightens the bat and moves its center of gravity toward the handle. Finally, the bat is stained in one of several standard colors, including natural, red, black, and two-tone blue and white.
Catcher's equipment - A catcher is the target for the pitcher, so the catcher must wear protective gear that covers the majority of his body. Catcher's gear includes a helmet with a faceguard that is similar to a hockey goalie's mask, a chest protector, shin guards, and a special padded glove. Some catcher's also wear devices called knee savers, which are triangular pads that attach to the players calves and rest his knees even while squatting behind the plate.
Versatile fungo bats are the ones tailored for both outfield and infield practice. Infield bats are effective for those that desire to rip their ball to the young ball hawks. These bats are thicker and heavier through the center in order to give you more oomph. Thicker bats work better especially to softball coaches to hit bigger balls utilized for softball.
Fungo bats typically weigh between 17 to 22 ounces and may be as long as 37 inches, making them longer than most bats used for hitting. According to Pro Bats, a typical professional baseball player uses a bat that is about 34 inches long and weighs about 32 ounces, although there is considerable variation. Fungo bats not only are longer than regular bats, they also are skinnier. Like regular bats, fungo bats can be made of metal or wood.
While many people view the fungo bat more as an antique piece of baseball’s history, there’s no doubt that it still has a special place in the modern game. Actually, the bat is starting to enjoy some revival all-round the game. Regardless of minimal production of fungo bats, you can rest assured that they’re here to stay. The bats are too beneficial to both coaches and players on a daily basis.
Chris Coste, a former catcher for the Philadelphia Phillies who coaches at Division III Concordia, in Moorhead, Minn., agreed. “When baseball is every single day, you’ve got to do things differently,” he said. “In the big leagues, they get so many ground balls during batting practice that infield is more for the fans and more for the scouts and things like that. At this level, we need it, and we love doing it.”
A baseball bat is a smooth wooden or metal club used in the sport of baseball to hit the ball after it is thrown by the pitcher. By regulation it may be no more than 2.75 inches (70 mm) in diameter at the thickest part and no more than 42 inches (1,100 mm) long. Although historically bats approaching 3 pounds (1.4 kg) were swung,[1] today bats of 33 ounces (0.94 kg) are common, topping out at 34 ounces (0.96 kg) to 36 ounces (1.0 kg).[1]
A fungo bat's size and weight make it easier to operate with one hand or two. Coaches can toss a ball up with one hand and hit pop flies or ground balls farther and with greater accuracy with a fungo bat than with a regular bat. According to an article by LJWorld, high school baseball coach Brad Stoll said fungo bats allow him to hit more balls because heavier regular bats would "wear you out." Fungo bats should be used as a practice tool only and should not be used to hit a pitched ball.
Baseball players spend more time training and practicing than playing actual games. You need equipment to take the field during a game, but that equipment won't necessarily prepare you to perform your best out there. Training aids and other baseball practice tools help to grow your game before you take the field so that when you do take that important swing, or field that liner your body and mind are prepared to perform. With batting aids, pitching aids, fielding aids, hitting tees, pitching machines, practice balls, and many more training equipment, Sports Unlimited is able to provide the opportunity to turn any baseball hopeful into a better baseball player. Dreaming it doesn't make it come true, but training hard might.
If you have attended a Major League Baseball game in the last 15 years, pregame infield practice, known simply as infield, may be unfamiliar. All but abandoned by the early 2000s, the ritual lives on at the C.W.S. and at college stadiums all over the country. On Monday night, the routine will be repeated before Virginia takes on Vanderbilt in the first game of the finals.
Baseball players spend more time training and practicing than playing actual games. You need equipment to take the field during a game, but that equipment won't necessarily prepare you to perform your best out there. Training aids and other baseball practice tools help to grow your game before you take the field so that when you do take that important swing, or field that liner your body and mind are prepared to perform. With batting aids, pitching aids, fielding aids, hitting tees, pitching machines, practice balls, and many more training equipment, Sports Unlimited is able to provide the opportunity to turn any baseball hopeful into a better baseball player. Dreaming it doesn't make it come true, but training hard might.
At bat Baltimore chop Bat flip Chinese home run Batting count Bunt sacrifice bunt slap bunt squeeze play Checked swing Cleanup hitter Designated hitter Double Double switch Foul ball Foul tip Golden sombrero Grand slam Ground rule double Hat trick Hit Hit and run Hit by pitch Hitting for the cycle Home run Infield hit Inside-the-park home run Leadoff hitter Lefty-righty switch Line drive Moonshot Plate appearance Platoon system Pull hitter Sacrifice fly Single Strikeout Strike zone Sweet spot Switch hitter Triple Walk Walk-off home run
Manufacturers position each bat's label over the mechanically weaker side of the wood.[9] To reduce chance of fracture,[9] and maybe deliver more energy to the ball,[10] a bat is intended to be held so the label faces sky or ground when it strikes the ball during a horizontal swing.[9] In this orientation, the bat is considered stiffer and less likely to break.[11]
Versatile fungo bats are the ones tailored for both outfield and infield practice. Infield bats are effective for those that desire to rip their ball to the young ball hawks. These bats are thicker and heavier through the center in order to give you more oomph. Thicker bats work better especially to softball coaches to hit bigger balls utilized for softball.
Once the basic bat has been turned, it has the manufacturer's name, the serial number, and often the signature of the player endorsing it branded into it opposite the wood's best side. Honus Wagner was the first player to endorse and sign a bat. Next, most bats are given a rounded head, but some 30%[citation needed] of players prefer a "cup-balanced" head, in which a cup-shaped recess is made in the head; this lightens the bat and moves its center of gravity toward the handle. Finally, the bat is stained in one of several standard colors, including natural, red, black, and two-tone blue and white.
Catcher's equipment - A catcher is the target for the pitcher, so the catcher must wear protective gear that covers the majority of his body. Catcher's gear includes a helmet with a faceguard that is similar to a hockey goalie's mask, a chest protector, shin guards, and a special padded glove. Some catcher's also wear devices called knee savers, which are triangular pads that attach to the players calves and rest his knees even while squatting behind the plate.
Shirt and pants worn by all players, coaches and managers. Each team generally has a unique pattern of colors and designs. Traditionally, the home team's uniform is predominantly white with the team's nickname, and the visiting team's is predominantly gray with (usually, but not always) the team's city. Teams often have white, gray and colored jerseys; colored jerseys can be worn at home or on the road, depending on the team's preference.
In 1990, Bruce Leinert came up with the idea of putting an axe handle on a baseball bat. He filed a patent application for the 'Axe Bat' in 2007 and the bat started being used in the college and pro ranks over the following years. In 2012, the Marietta College Pioneers baseball team won the NCAA Division III World Series using axe handled bats.[2] Several Major League Baseball players have adopted the bat handle including Mookie Betts, Dustin Pedroia, George Springer, Kurt Suzuki and Dansby Swanson.[3][4]
Play It Again Sports® is a registered trademark of Winmark Corporation based in Minneapolis, MN. Any unauthorized use of this trademark by others is subject to action under federal and state trademark laws. Other brand names are trademarked or registered by their respective companies. Each Play It Again Sports store is independently owned and operated.
How the bat is made is what differentiates it from the typical regulation bat used by major league players. In addition to being lighter and thinner, the bat is also much longer compared to the normal bat. It ranges between 35 – 37 inches in terms of length. In terms of weight, the bat weighs between 17 – 22 ounces. Of great importance to note is the fact that the bat features a bigger barrel than the normal ones. Since it’s flatter and features a small diameter, it’s ideal when it comes to hitting ground balls as well as pop flies. This would be necessary during the fielding practice of any team regardless of the level.
×