There are many advantages to using a fungo bat. If you are a coach or a parent looking to improve your player's defensive skill set, you're going to want and need a fungo bat. A normal adult wooden baseball bat will weigh around 27-31 ounces, and after a couple of rounds of pop-flys, it is going to feel like you just went through a full-on workout. With the help of a fungo bat, you will be able to hit ground balls and pop flys all day without getting fatigued.  The barrel on a fungo bat will typically be 2 1/4 inches in diameter which greatly helps increase your control over the bat through the hitting zone. While the barrel has a much more thin diameter, it is also much longer in comparison to a normal wood baseball bat. This larger hitting surface and smaller barrel combine to give coaches and parents quick swing speeds with precise accuracy. 
Players can also create complex holes such as ‘two-part holes’ where the players must hit or reach one object before attempting to shoot at the hole. For example, a ‘two-part hole’ could consist of hitting the scoreboard first, and then once they have hit the scoreboard they must hit the ball back to home plate, that would be one hole with the player with the fewest strokes winning the hole. ‘Two-part holes’ are typically saved for the last hole in order to make things more complex and difficult on the leader.
A fungo bat is a specially designed bat used by baseball and softball coaches for practice. The etymology of the word fungo ( /ˈfʌŋɡoʊ/) is uncertain, but the Oxford English Dictionary suggests it is derived from the Scots fung: to pitch, toss, or fling.[26] A fungo is longer and lighter than a regulation bat, with a smaller diameter. The bat is designed to hit balls tossed up in the air by the batter, not pitched balls.[27] Typical fungo bats are 35 to 37 inches (89 to 94 cm) long and weigh 17 to 22 ounces (480 to 620 g). Coaches hit many balls during fielding practice, and the weight and length allow the coach to hit balls repeatedly with high accuracy. The small diameter also allows coaches to easily hit pop-ups to catchers and infielders along with ground balls due to better control of the barrel of the bat.
Once the basic bat has been turned, it has the manufacturer's name, the serial number, and often the signature of the player endorsing it branded into it opposite the wood's best side. Honus Wagner was the first player to endorse and sign a bat. Next, most bats are given a rounded head, but some 30%[citation needed] of players prefer a "cup-balanced" head, in which a cup-shaped recess is made in the head; this lightens the bat and moves its center of gravity toward the handle. Finally, the bat is stained in one of several standard colors, including natural, red, black, and two-tone blue and white.
Shirt and pants worn by all players, coaches and managers. Each team generally has a unique pattern of colors and designs. Traditionally, the home team's uniform is predominantly white with the team's nickname, and the visiting team's is predominantly gray with (usually, but not always) the team's city. Teams often have white, gray and colored jerseys; colored jerseys can be worn at home or on the road, depending on the team's preference.

Are you on the hunt for a fungo bat? Did we answer all of your questions about fungo bats? If not, please leave your question below in the comments section so that we can answer any that you may have. Our Customer Coaches are available 24/7 via phone (816-321-2287), email (support@justbats.com), and we even have a live chat feature to answer all of your baseball bats and softball bats questions. Remember, we're here for you from click to hit!
Next, third base fungo hits to left, who throw to second, SS cuts (make a few of these the "cut off a double on a ball hit into the corner" variety - timing becomes important here, as the other fungo needs to hit many fewer balls than the fungo hitting to left). First base fungo hits to right, who come home, first baseman is cutoff, 60' from home (about pitchers mound - this postitioning puts him out of harms way should the SS overthrow second). On the throws home from right, make sure that they are the "normal" kind - hit the cutoff man, and don't hit too many. The right fielders will get to go again, as they're last throws will be the "do-or die" variety.
A baseball bat is divided into several regions. The "barrel" is the thick part of the bat, where it is meant to hit the ball. The part of the barrel best for hitting the ball, according to construction and swinging style, is often called the "sweet spot". The end of the barrel is called the "top", "end" or "cap" of the bat. Opposite the cap, the barrel narrows until it meets the "handle". The handle is comparatively thin, so that batters can comfortably grip the bat in their hands. Sometimes, especially on metal bats, the handle is wrapped with a rubber or tape "grip". Finally, below the handle is the "knob" of the bat, a wider piece that keeps the bat from slipping from a batter's hands.
The most obvious reasons to utilize a fungo bat is the fact that it’s lightweight. It’s handy to coaches when conducting fielding practice since he or she has to hit plenty of balls to warm up his or her players. What is for sure is that hitting countless balls during practice can be tiring. Consequently, having a bat that’s lighter weight is magical at preventing the coach and/or players from getting tired.
Play It Again Sports® is a registered trademark of Winmark Corporation based in Minneapolis, MN. The Play It Again Sports®, Plato's Closet®, Once Upon A Child®, Music Go Round®, and Style Encore® trademarks and logos utilized in this website are owned by Winmark Corporation and any unauthorized use of these trademarks by others is subject to action under federal and state trademark laws. Other brand names are trademarked or registered by their respective companies.
Within league standards there is ample latitude for individual variation, many batters settling on their own bat profile, or one used by a successful batter. Formerly, bats were hand-turned from a template with precise calibration points; today they are machine-turned to a fixed metal template. Historically significant templates may be kept in a bat manufacturers' vault; for example, Babe Ruth's template, which became popular among major-league players, is R43 in the Louisville Slugger archives.[citation needed]
To practice throwing around the infield, Bates recommends several drills you can use. The first involves placing four fielders in a square, about 15 feet apart. The players flip the ball underhanded to each other, like in a double play. Keep their arms straight, using a stiff wrist, with gloves on their hips once the ball is out. Every fielder follows their flip, glove side first, rotating around the square. The idea is to have a sequence of catch, flip and follow. The ball should be caught with two hands, palms open. After about two minutes, repeat the process rotating the other way for another two minutes.
To practice throwing around the infield, Bates recommends several drills you can use. The first involves placing four fielders in a square, about 15 feet apart. The players flip the ball underhanded to each other, like in a double play. Keep their arms straight, using a stiff wrist, with gloves on their hips once the ball is out. Every fielder follows their flip, glove side first, rotating around the square. The idea is to have a sequence of catch, flip and follow. The ball should be caught with two hands, palms open. After about two minutes, repeat the process rotating the other way for another two minutes.
A fungo bat is a specially designed bat used by baseball and softball coaches for practice. The etymology of the word fungo ( /ˈfʌŋɡoʊ/) is uncertain, but the Oxford English Dictionary suggests it is derived from the Scots fung: to pitch, toss, or fling.[26] A fungo is longer and lighter than a regulation bat, with a smaller diameter. The bat is designed to hit balls tossed up in the air by the batter, not pitched balls.[27] Typical fungo bats are 35 to 37 inches (89 to 94 cm) long and weigh 17 to 22 ounces (480 to 620 g). Coaches hit many balls during fielding practice, and the weight and length allow the coach to hit balls repeatedly with high accuracy. The small diameter also allows coaches to easily hit pop-ups to catchers and infielders along with ground balls due to better control of the barrel of the bat.
Manufacturers position each bat's label over the mechanically weaker side of the wood.[9] To reduce chance of fracture,[9] and maybe deliver more energy to the ball,[10] a bat is intended to be held so the label faces sky or ground when it strikes the ball during a horizontal swing.[9] In this orientation, the bat is considered stiffer and less likely to break.[11]
As to who created the first ever fungo, baseball fans may never know. The word fungoes and fungo batting have been referenced since the early 1800's, but nobody has been able to pinpoint the original source. Baseball fans and historians both agree that the creator of the first ever fungo is somewhat of a mystery. Here at JustBats, we may not know who created the first ever fungo, but we are sure glad that they did!
×