There are limitations to how much and where a baseball player may apply pine tar to a baseball bat. According to Rule 1.10(c) of the Major League Baseball Rulebook, it is not allowed more than 18 inches up from the bottom handle. An infamous example of the rule in execution is the Pine Tar Incident on July 24, 1983. Rules 1.10 and 6.06 were later changed to reflect the intent of Major League Baseball, as exemplified by the league president's ruling. Rule 1.10 now only requires that the bat be removed from the game if discovered after being used in a game; it no longer necessitates any change to the results of any play which may have taken place. Rule 6.06 refers only to bats that are "altered or tampered with in such a way to improve the distance factor or cause an unusual reaction on the baseball. This includes, bats that are filled, flat-surfaced, nailed, hollowed, grooved or covered with a substance such as paraffin, wax, etc." It no longer makes any mention of an "illegally batted ball". In 2001, MLB approved the use of Gorilla Gold Grip Enhancer in major and minor league games as an alternative to pine tar.[23][24]
A fungo bat is a specially designed bat used by baseball and softball coaches for practice. The etymology of the word fungo ( /ˈfʌŋɡoʊ/) is uncertain, but the Oxford English Dictionary suggests it is derived from the Scots fung: to pitch, toss, or fling.[26] A fungo is longer and lighter than a regulation bat, with a smaller diameter. The bat is designed to hit balls tossed up in the air by the batter, not pitched balls.[27] Typical fungo bats are 35 to 37 inches (89 to 94 cm) long and weigh 17 to 22 ounces (480 to 620 g). Coaches hit many balls during fielding practice, and the weight and length allow the coach to hit balls repeatedly with high accuracy. The small diameter also allows coaches to easily hit pop-ups to catchers and infielders along with ground balls due to better control of the barrel of the bat.

A fungo bat is used by the coach to hit ground balls or fly balls to his team. All throughout high school and college many players use fungo bats to play fungo golf. This is when each person has a fungo bat and a baseball and they pick out targets around their field or complex and basically play it in the same manner as golf. Fungo bats should not be used to hit a pitched baseball because they are much weaker than normal bats and will break much much easier.
Manufacturers position each bat's label over the mechanically weaker side of the wood.[9] To reduce chance of fracture,[9] and maybe deliver more energy to the ball,[10] a bat is intended to be held so the label faces sky or ground when it strikes the ball during a horizontal swing.[9] In this orientation, the bat is considered stiffer and less likely to break.[11]
Versatile fungo bats are the ones tailored for both outfield and infield practice. Infield bats are effective for those that desire to rip their ball to the young ball hawks. These bats are thicker and heavier through the center in order to give you more oomph. Thicker bats work better especially to softball coaches to hit bigger balls utilized for softball.
As I had previously mentioned, the amount of teaching points is limitless.  The length of the game will really depend on how often you stop the action in order to discuss points related to base running, backing up throws, fielding techniques, and etc.  If you have assistant coaches, have them distributed throughout the field in order to help with certain teaching points on the spot, thus eliminating full stoppages of the game.  Now get out there and start putting the “FUN” back into fungo. I know that’s pretty corny, but I couldn’t help myself 🙂

This sounds like a lot of information, but with a little practise on the coaches part, it runs quite smoothly. Two to three reps per player in the field per section is quite adequate, and with 14 men on the field, this whole routine should take about 7 minutes. It's quite snappy, and quite impressive. I had many a parent marvel to me after witnessing it - "you look like a professional team!" I wouldn't try the routine with anything less than a 14 yr old select team, but with the talent to do it right, it's fantastic.


Once the basic bat has been turned, it has the manufacturer's name, the serial number, and often the signature of the player endorsing it branded into it opposite the wood's best side. Honus Wagner was the first player to endorse and sign a bat. Next, most bats are given a rounded head, but some 30%[citation needed] of players prefer a "cup-balanced" head, in which a cup-shaped recess is made in the head; this lightens the bat and moves its center of gravity toward the handle. Finally, the bat is stained in one of several standard colors, including natural, red, black, and two-tone blue and white.
Next, third base fungo hits to left, who throw to second, SS cuts (make a few of these the "cut off a double on a ball hit into the corner" variety - timing becomes important here, as the other fungo needs to hit many fewer balls than the fungo hitting to left). First base fungo hits to right, who come home, first baseman is cutoff, 60' from home (about pitchers mound - this postitioning puts him out of harms way should the SS overthrow second). On the throws home from right, make sure that they are the "normal" kind - hit the cutoff man, and don't hit too many. The right fielders will get to go again, as they're last throws will be the "do-or die" variety.
When it comes to baseball gloves, it's not uncommon for players to develop a deep attachment to their glove. It's the same glove they trot out onto the field with every inning and many players, once they are into the 'adult' sizes, use the same glove for their entire life! It might seem crazy to outsiders, but there's just something about a high quality, leather baseball glove that becomes part of a player to the point that it feels wrong to wear a different glove. That is why it is so important to find the right glove, the right pocket, the right size, the right leather, and the right color. Gloves aren't just gloves, they are part of who you become as a player. Check out our selection of gloves by position, size, and brand or explore the buying guide specifically made to help you decide which baseball glove to buy if you need some guidance!
At bat Baltimore chop Bat flip Chinese home run Batting count Bunt sacrifice bunt slap bunt squeeze play Checked swing Cleanup hitter Designated hitter Double Double switch Foul ball Foul tip Golden sombrero Grand slam Ground rule double Hat trick Hit Hit and run Hit by pitch Hitting for the cycle Home run Infield hit Inside-the-park home run Leadoff hitter Lefty-righty switch Line drive Moonshot Plate appearance Platoon system Pull hitter Sacrifice fly Single Strikeout Strike zone Sweet spot Switch hitter Triple Walk Walk-off home run
Also called a baseball cup, box, athletic cup - made of hard impact-resistant plastic or light metal, often with flexible sides for comfort and protection, designed to protect the testicles and groin from impact of a baseball, baseball bat, cleats, or any other moving object. Absolutely required for catchers, pitchers, and often all infielders. Many leagues require all male players to wear jockstrap and cup for practices and games.
First base fungo hits fly balls to center field (helps here if both fungo hitters move up and apart, hitting from about the front of the mound extended towards the bases). Center throws to second, second baseman is cutoff (for us it was, anyways - change to suit your style). Third base fungo hits balls to left field, who throw to third, with a second shortstop as cutoff (but you really don't need one, if you're shorthanded).
Break your team up into 2 or 3 teams. If you do 2 teams you’ll need 8 or 9 on a team with a player for each defensive position. If you only have 8 on a team you can eliminate either the pitcher, catcher, or one outfielder based on what is a priority for your team that day.  If  you only have 12-15 players on your team break it up into 3 teams of 4-5. Then place two of the teams on defense and one team hitting fungoes. No matter what, have the teams and batting orders pre-made before practice. This will eliminate unnecessary downtime during practice.

“They’re not moving, their feet are apart, their gloves are on the ground, backs are flat, and they’re working down to up, out to in, basically a steady roll back and forth probably 15 to 20 each,” Bates said. “Then they’ll turn their body, work glove side for another 15 to 20, and backhand 15 to 20. No movement, really, just making sure we’re watching the ball roll into our glove, fielding it, and doing all the things fundamentally correct.”

Break your team up into 2 or 3 teams. If you do 2 teams you’ll need 8 or 9 on a team with a player for each defensive position. If you only have 8 on a team you can eliminate either the pitcher, catcher, or one outfielder based on what is a priority for your team that day.  If  you only have 12-15 players on your team break it up into 3 teams of 4-5. Then place two of the teams on defense and one team hitting fungoes. No matter what, have the teams and batting orders pre-made before practice. This will eliminate unnecessary downtime during practice.


“They’re not moving, their feet are apart, their gloves are on the ground, backs are flat, and they’re working down to up, out to in, basically a steady roll back and forth probably 15 to 20 each,” Bates said. “Then they’ll turn their body, work glove side for another 15 to 20, and backhand 15 to 20. No movement, really, just making sure we’re watching the ball roll into our glove, fielding it, and doing all the things fundamentally correct.”
The fungo is used by a coach to hit balls for defense practice. It is lighter weight, so less fatiguing to hit ball after ball. The fungo sheds its weight above the hands. The severely tapered barrel to drops weight and maintains a high moment of inertia. While the bat would be at greater risk of breaking if used in a live batting exercise, it is safe to use in practice because there are much fewer mis-hits.

Prepping for baseball season requires not only discipline and hard work, but also the right gear. Because there are multiple parts to the game in fielding, pitching and batting, using the right equipment is vital to finding success within them all. In order to help you find success in every facet of the game, we select the best brands to carry including, but definitely not limited to Easton, Rawlings, Wilson, Louisville Slugger, and Mizuno. Every player has his own preferences when it comes to a glove, bat, and cleats and that's why it's so important to have not only a vast array of brands and styles within each piece of equipment, but also a Guide on How to Shop for Baseball that helps players or parents discover which glove, bat, and other equipment is the right choice.


At Baseball Savings, you'll find the best baseball equipment because the only thing we care more about than the game is how you perform. We also carry the best softball equipment, apparel, and accessories. But this only represents half the equation. You're also sure to find all the latest baseball gear at the lowest prices, and if you happen to find a lower price, we'll match it! Looking for clearances, closeout items, and specials? Baseball Savings frequently puts high quality softball gear and baseball gear on sale. It doesn't matter your age, gender, or skill level. Everything you need to make you a better player is right here!

It is not clear why pregame infield fell out of favor in the majors. Today, coaches hit balls to infielders and outfielders during batting practice. Most players go at it leisurely, lobbing balls back in or across the diamond. That rankles old-school players like Jerry Kindall, a former major league infielder who coached Arizona to three N.C.A.A. titles before retiring in 1996.


The bat's form has become more refined over time. In the mid-19th century, baseball batters were known to shape or whittle their own bats by hand. This allowed there to be a wide variety in shape, size, and weight. For example, there were flat bats, round bats, short bats, and fat bats. Earlier bats were known to be much heavier and larger than today's regulated ones. During the 19th century, many shapes were experimented with, as well as handle designs. Today, bats are much more uniform in design.
Players can also create complex holes such as ‘two-part holes’ where the players must hit or reach one object before attempting to shoot at the hole. For example, a ‘two-part hole’ could consist of hitting the scoreboard first, and then once they have hit the scoreboard they must hit the ball back to home plate, that would be one hole with the player with the fewest strokes winning the hole. ‘Two-part holes’ are typically saved for the last hole in order to make things more complex and difficult on the leader.
×